Service Pack Four (SP04)
AirJet Pump Descaling:
- 1x Air Blower Coupler Gasket (A Connector)
- 2x Water Coupler Washers (B+C Connectors)
- 3x Descaling Tablets
Filter Pump Service Pack - Suitable for Model #58113 or P4071
- 1x Filter Pump Impeller (Stainless Steel Shaft)
- 1x Filter Pump Flange Seal
- 4x Filter Pump O-Rings
- 6x Filter Pump Screws, Washers and Nuts
- 2x Jubilee Clips
Aluminium PTC Heater Service Pack - Suitable for 220 or 110 Volt
- 1x Air Blower Coupler Gasket (A Connector)
- 2x Water Coupler Washers (B+C Connectors)
- 3x Descaling Tablets
- 2x PTC Heater Gaskets
- 1x Flow Sensor Gasket
- 12x PTC Heater Screws
- 1x Metal Brush
For Legacy Egg Shaped Pumps
- 1x PTC Heater Thermostat Gasket
- 1x Flow Sensor Gasket
For the Lay-Z-Spa/SaluSpa AirJet - Full Maintenance Pack Refill
Everything works better when serviced; this kit contains everything you would need to give your pump a new lease of life. As long as you are confident with a screwdriver, all parts are relatively straightforward to replace. Our team is also here and happy to help should you need some guidance.
Regular descaling of your pump will help improve water flow by eliminating calcium deposits from critical components such as the heater, circulation pump, and flow sensor.
Our Maintenance Pack Four (MP04) includes three descaling tablets and a replacement set of external gaskets as these often perish through contact with chlorine. In addition you will receive all the parts you will need to fully service your Filter Pump (model #58113 or P4071), and aluminium PTC heater (220 or 110 Volt) assembly and flow sensor housing. The kit is compatible with AirJet pumps of both legacy 'egg' and newer flip up display designs.